The redesigned Quikspray® Chip Sprayer™ permits the even distribution of large and small, variegated or mono colored chips for the seamless application. Even distribution will allow for less product waste, and less clean up. The low pressure/high volume blower reduces chip breakage, sometimes found with hand application.
The overall length is less than 18”, allowing this unit proper operation in confined or open application areas. Extremely high application rates are normal with the Chip Sprayer™, and the higher production will pay for this unit with one large project.
View Spec SheetPrice available upon request.
1/8”: 2.3#/min vinyl chips
5.5# in gallon hopper
¼”: 2#/min
3.5# in gallon hopper
Increases Production by 10x
Even Distribution of Chip
Lightweight & Portable
Operates on Standard 110v
Rugged All Steel Construction
Easy To Use & Maintain
100% Coverage
Adjustable Air & Material Flow
Over a Gallon Hopper Capacity
Our website uses cookies to make sure you have the best experience possible. By clicking “Accept”, you consent to our use of cookies.
